Furniture Repair and Refinishing NYC - To Save Money

Purchasing brand new furniture is not only expensive, but you are also unlikely to get high-quality, durable items. Whether you are refurbishing an emotionally valuable heirloom insole, sorting out flea market discoveries, or just repairing an old piece of furniture, Furniture Repair & Refinishing NYC is a best source and great way to put money in your pocket and reduce waste. Read on for 7 important tips and steps, which will teach you how to refurbish furniture to save money.

1. Ensure that the furniture structure is reasonable.

Remember, no matter how many times you polish and repair a piece of poorly made furniture, it will still be poorly made. Before you repair any item, make sure it is structured properly.

Before starting the repair process, perform any structural repairs, such as re-gluing wood joints or tightening any loose screws.

2. Remove old finishes.

Perhaps the messiest and most difficult part of refurbishing furniture is removing old finishes. The easiest way to remove old varnish and paint is to use chemical strippers and sanding. When using a chemical stripper, be sure to do it outdoors to minimize inhalation of smoke and wear protective safety equipment. In addition, you need to follow up any chemical peels with final sanding. First, carefully check the workpiece with 120# sandpaper and finally 220# fine sandpaper.

3. Fill in the food.

Some woods do not require you to fill in the grain, but woods such as mahogany and oak have a wider grain structure and should be filled before the furniture is repaired.

You can get grain fillers in most wood shades and colors, and can be used before or after dyeing.

4. Apply sanding sealant.

Sanding the sealant will not be done on the wood after you sand it, but before you sand it. Although this is not necessary, it allows the wood to absorb stains in a more even way, thereby preventing excessive staining.

5. Stain wood.

If you are repairing wood products, you will most likely use stains to repair furniture. You can use four different stains: oily stains, water-based stains, gel stains, and one-step stain finishes.

When applying stains, always follow us Furniture Repair & Refinishing NYC

6. Paint the wood.

Seal all your hard work and keep the wood safe by applying several layers of polyurethane or varnish.

7. Put on the new hardware.

Finally, update the furniture with new drawer handles or hardware fixtures, and do the final touches to give it a new look.

For in-depth information about home improvement, please visit amatofurniture.com, a popular website