A wireless network's coverage area can be enlarged with the help of Wavlink AC2100 Setup. It works by receiving a wireless signal from a router, amplifying it, and then retransmitting it to regions of the home or workplace where the signal is weak or nonexistent. As a result, users may now enjoy a better and more reliable wifi connection in places such as basements, attics, and outdoor areas. The extender employs the AC2100 wireless protocol, which can provide higher speeds as well as more coverage than earlier protocols.

There are two ways to connect the Wavlink AC2100 setup:

1. WPS method

2. Manual Method

Wavlink AC2100 setup using with WPS method

Wireless devices can join a network using Wireless Protected Setup (WPS) without needing to submit a password. It uses a push-button or PIN-based approach to establish a secure connection between the device and the wireless router. This eliminates the need for a complex password and allows for the quick and secure installation of new network devices.

Follow the steps below to set up the Wavlink AC2100 using WPS (wireless protected setup). WPS is the quickest and most straightforward method of expanding your host network and configuring your Wavlink wifi extender.

The following are the steps for configuring a Wavlink AC2100 extender through WPS:

1. First, place your Wavlink wifi extender next to the router.

2. Turn on the Wavlink AC2100 extender.

3. Secure the LED light and wait for it to completely turn green.

4. Both your router and your AC2100 should have WPS enabled.

5. The green light is now blinking.

6. Let your extender take a few seconds to connect to your home wifi router.

The Wavlink AC2100 WPS configuration is now complete. If you have any questions concerning your Wavlink extender, please contact or chat with us.

Wavlink AC2100 Extender setup via Manual

To connect the Wavlink AC2100 extender configuration manually, follow these steps:

1. Start by plugging in the Wavlink AC2100.

2. Connect your favourite smart device if you have one.

3. Connect your device to the WAVLINK-N network.

4. Launch your favourite web browser.

5. Open a web browser and type 192.168.10.1 into the address bar of the Wavlink extender.

6. Enter the administrator login and password next.

7. Configure your Wavlink AC2100 extender setup now by following the on-screen instructions.

If you're having difficulties configuring your Wavlink extender, please contact us by toll-free phone or live chat. They will deal with your issue.

How can I upgrade the Wavlink AC2100 extender firmware?

When firmware is incorporated in a device, such as a router, it controls the device's core functions and capabilities. The Wavlink AC2100 router's firmware is responsible for managing network connections, properly routing data packets, and offering security measures such as firewalls and encryption. The router's configurations and user interfaces, including the web-based administration page, must also be updated and maintained. To improve the router's functionality, security, and compatibility with more contemporary devices, the firmware can be updated.

The following are the instructions for updating the firmware on the Wavlink AC2100:

1. Launch a web browser.

2. In the address bar, enter wifi.wavlink.com.

3.Input your normal password.

4. Click the Login button.

5.Next, install the most recent Wavlink AC2100 firmware.

6.When finished, tap the setup button.

7. Your extender will then restart.

If the recommended measures do not produce the desired results, you must contact our technical experts. 

What are the Common issue for my Wavlink AC2100 setup

• Slow internet speeds

• Connection drops

• Difficulty setting up the router

• Limited range

• Poor customer support

Troubleshooting steps for Wavlink AC2100 extender setup

Here are some troubleshooting techniques for your Wavlink AC2100 setup:

1. Check the power supply: Check that the router is correctly connected and that the power outlet is operational.

2. Check the network cables: Check that the network cables are correctly connected to the router and the device to which you are attempting to connect to the network.

3. Check the wireless connection: Check that the wireless connection on the device you're attempting to connect to the network is turned on.

4. Check the router's IP address: Check that the IP address of the router is accurate.

5. Check the router's firmware: Check to see if the firmware on the router is up to date. If not, get the latest recent version.

6. Check the router's settings: Check that the router's settings, such as the wireless name (SSID) and password, are accurate.

7. Check for interference: Check for interference from other electronic devices that could be causing connectivity troubles.

8. Perform a hard reset: If all else fails, hard reset the router by holding down the reset button for 15 seconds. The router's settings will be reset to factory defaults.

If still you’re getting an issue related to the Wavlink AC2100 setup. Don't be hesitant to contact our technical expats via toll-free number. or live chat. They will solve your problem.