There can be a lot of waste from both indoor and outdoor construction. Wood, plaster, stone and dirt are all common site waste. Although it may seem daunting, you can make it easier by following these tips.

Tips to Clean Up After Construction Projects

To ensure safe and efficient cleanup of construction sites, it is important to break down the task into smaller tasks. Then, you can take each one as it comes. To minimize injury, wear gloves, masks, goggles, and closed-toe shoes while cleaning. You may have to clean more than one item after cleaning up a large-scale job. You might consider finding a “dumpster rental near me” for your post- construction clean ups.

These are some post-construction cleaning suggestions to help you break down the tasks into manageable steps.

1. Cleanse the Air

It is vital to purify the air at construction sites for your health. The dust from construction sites is full of hazardous particles, including crystalline silicon. Crystalline Silica is a naturally occurring mineral substance that's formed from the crushing of rock, stone, bricks and concrete. Crystalline silica inhaled can cause lung and kidney disease, chronic obstructive pulmonary disease (COPD), or cancer.

Protective gear is the best way to prevent these particles from entering your body. Also, make sure to purify the air using an air purifier. Clear obstructions, debris and other particles from the air vents.

2. Cleanse and vacuum the floors

To remove dirt and dust from hardwood floors and carpeted floors indoors, sweep them regularly. Because sweeping can stir up debris, make sure you do this before you start any major cleaning. This will ensure that you don't have to re-dirty the area after you're done. Outdoors: Make sure you sweep all patios, walkways, porches, and other hardscapes. On some surfaces, you might consider using a pressure washer.

3. Cleanse and dry surfaces

After you have vacuumed up most of the dust, wipe down any surfaces in your house or office. Use sanitizing wipes or a sanitizing solution to disinfect. An industrial shampooer may be needed to deep clean carpets and furniture. Use cleaning agents that are suitable for the materials you are working with. For example, a tile- or wood-safe cleaner.

The following outdoor and indoor areas should be cleaned, wiped down and sanitized:

• Countertops

• Ceiling fans

• Windows and window sills

• Blinds

• Lighting fixtures

• Handrails

• Furniture

• Appliances

• Cabinetry

• Cupboards

• Built-in shelves

• Door handles and hinges

• Trimming, walls and doors

These areas should be thoroughly dried after you have cleaned them. This will prevent moisture damage and mold growth.

4. Tools and Hardware that are clean

Before you store your tools and hardware, make sure to thoroughly clean them. This will ensure that they last longer and prevent buildup that could hinder their performance. This will save you time and help you get started on your next project. Be sure to use a tool-safe cleaner and take care when cleaning sharp tools.

5. Open the Windows

To reduce the dust, chemicals, and paint fumes inhaled while working indoors, make sure you keep your windows open. This is particularly important when cleaning up job sites.

6. Get rid of your waste

After-construction cleaning is only as good as the prompt disposal of waste. You can attract wildlife and insects to your debris if you leave it out too long. Also, you could trip over large pieces of waste. Contractors working for clients have a tight time frame and must complete the job on time. This includes ensuring that your waste disposal methods are efficient and effective.

For easier disposal, create designated areas for different types of waste. To sort your waste, use disposable gloves and garbage bags.

• Garbage: This includes both standard waste and any debris that isn't recyclable or dangerous. You can place certain items in a dumpster or not. Make two piles of refuse. Common items you cannot throw in a dumpster for construction sites are appliances, paints, and chemical cleaners.

• Recyclable: Keep in mind local recycling regulations and place all recyclables such as cardboard, metal, and plastic products in a separate pile from the garbage.

• Hazardous: This is hazardous waste that poses a danger to you or your environment. The Environmental Protection Agency (EPA), has regulations that you must comply with when disposing of hazardous materials. These materials cannot be placed in a dumpster as they pose a risk to public safety.

• Reusable: Some materials and parts can be reused, such as old doors, glass panes, and scrap metal. These pieces can be saved in a separate pile for later resale or upcycling.

7. Do a final walk-through

After you have finished cleaning, take a break for a couple of hours or overnight. This will allow dust and debris to settle, as well as give you the chance to get fresh air. You'll be able to see the areas that you missed cleaning again when you return. You can also clean off any dust from the last time you were away.

8. Rent a Dumpster

Renting an off-site dumpster from a  lancaster dumpster rental company allows you to quickly and easily dispose of waste so that you have the space you need while you take care of other cleaning chores. It also prevents wildlife and rain from making more garbage. For increased convenience, dumpsters come in sizes from 10 to 30.

Be careful how you load your dumpster when renting it to clean up after renovations. To maximize space, keep larger items on the bottom and stack smaller trash on top. Follow all rental instructions.