Most of us don't have access to actual horseshoes anymore, but it's easy to find a horseshoe game set that comes with U-shaped pieces of metal, and stakes to throw them at. This is all you need to get started, so find a flat spot in your backyard and start playing.

Learning to Play Horseshoes

Find a long area of flat ground. Use a tape measure to measure a stretch of relatively flat ground, at least 30 feet (9.1 meters) in length and preferably 40 ft (12.2 m). This will be your horseshoe court. 40 feet (12.2 m) is the longest distance used in horseshoe throwing, and the most common in tournaments, but if you're playing for fun you can use a shorter distance.
If the court is mainly for children, you might want to use a court as small as 15 ft (4.6 m) long, and consider putting two stakes side by side instead of on opposite ends of the court, to lower the chance of children hitting each other with the thrown horseshoes.

Pound two stakes into the ground. Use a mallet to drive two stakes into the ground, one at either end of the court. Tilt them about 12º toward each other, not straight into the ground. For a permanent horseshoe field, use long, iron rods, about 36 inches (91 centimeters) long and 1 inch (2.5 cm) in diameter. Otherwise, use any long stakes, ideally ones that extend about 15 inches (38 cm) above the ground after they're planted.
12º is a tilt approximately 1/8 of the way from vertical to horizontal geometry dash lite.

Improve the court (optional). You can skip this step and start playing immediately, or use these common methods to improve the stability and permanence of your court. If you want to minimize the number of slipping and bouncing horseshoes, you can dig a small pit of moist sand or moist blue clay around each stake. To keep the stakes firmly in position, bury a wooden log below the surface and drill an angled hole for the stake.