There are many motivations behind why you could see your forced air system or explicitly the evaporator curls cement into ice. In any case, it is dependably because of the way that the liquids are fruitless in variation to the intensity nearby in colder temperatures as well as the other way around in end of intensity with hotter temperatures. At the end of the day, immersion necessities are not met before the refrigerant liquid had the option to show up at the blower consequently convincing a response that produces a buildup interaction that frosts up rather than consistently streaming as it should because of the lower than ordinary temperature. Whenever this is seen, the underlying move toward consistently take is switching the climate control system off and allowing it to thaw out. Change it to warming mode for quicker defrosting.
Seeing that these are the principal activities that make sense of such a freezing peculiarity with evaporator loops, there are a few substantial impacts that will surely prompt such outcomes. The principal fundamental and most normal explanation is connected with the state of the curl. Whether it has an exceptionally filthy channel or has an obstructed conduit, your forced air system will no doubt freeze in the event that the ongoing stream is intruded. For this situation, the arrangement is extremely straightforward. You simply need to figure out what the justification for the block is and eliminate it. Dismantle the climate control system or have it done by an expert and clean all that to guarantee that it won't occur at any point in the near future as this is very typical for most central چیلر و فن کویل چیست.
One more component that you ought to investigate is having too little amounts of liquids or refrigerants which is undoubtedly by spillage. For this situation, one sign you can depend on is assuming the loop has frozen up and in the event that the temperature you have set it in isn't right. On that note, your pull pressure is off and ought to be fixed by a specialist central air expert subsequent to dissolving the ice. What the professional will fundamentally do is identify the loop spills and either patches and seals it or replaces the entire framework assuming there is an excessive amount of harm that common fixes will essentially not do.
On the off chance that this is as yet not the situation, attempt to take a gander at the state of the curl balances. For clear reasons, your climate control system won't possibly freeze yet additionally capability inappropriately assuming the loop blades are weakened either by being bent or compacted. The purpose for this is fairly connected with the principal make as it will bring about an impediment the refrigerant stream and air current. Once more, this is a task for a central air professional yet to deal with it all alone, you should initially have the option to evaluate how gravely harmed the blades are. Assuming they are fixable with a couple of poundings to a great extent, go on yet the states of balances are normally too serious that blockage results. You can either supplant the curl blades or the entire framework relying upon the extensity of the harm.