Every device that you use in the field is like a machine. If it malfunctions, then there is no way to work with it. This is why Fluke Meter Calibration available today, is the product of the highest degree of engineering and technology. But still, there are some faults that can occur in them due to manufacturing defects or mishandling at the time of installation or use.
In such cases, the instrument needs to be calibrated to make sure that it is working properly. The Fluke meter is one of the instruments that you need to calibrate often. You'll learn about the advantages of getting calibration in this post.
Quality assurance is a process to ensure that the product or service meets the customer's needs. Quality assurance is an integral part of quality control, which is a process used to reduce defects in a process by eliminating waste and rework, monitoring processes while they happen, making improvements and conducting root cause analysis when errors occur.
Fluke Meter Calibration should be performed at least once per year for best results but can be done quarterly if needed based on your typical workload or project duration.
It checks measurements against standards to ensure accuracy before calibration is performed on any instrumentation device.
MAINTAIN THE STANDARDS OF YOUR UNIT
Maintaining the standards of your unit is an important part of quality management and assurance. ISO 9000 standards set forth what a Fluke Meter Calibration can do for you, including:
- Quality control. Calibration helps to ensure that the device is working properly, which means it's less likely to cause any errors in measurements or data recording.
- Quality assurance. Calibrating also provides evidence that your meter was checked against existing standards at regular intervals—or at least some evidence of this (more on this later). This can help you show that you're taking steps to protect customers' interests by providing accurate readings and records.
ASSIGNED OPERATING ENVIRONMENT
In order to ensure that your meter is calibrated in the same manner and environment as it will be used, you must consult with the manufacturer. It is also important to make sure that whoever calibrates your meter has been trained by the manufacturer and understands how they operate.
TRAPS TO AVOID FOR TESTING EQUIPMENT
One of the most important aspects of testing equipment is to ensure that all operators are properly trained and qualified. Accurate calibration requires a technician to be thoroughly trained in how to properly inspect, maintain and operate a Fluke meter.
For example, if an operator does not know how to use the instrument correctly, it may be possible for them to miss small errors or problems with the device that could cause inaccurate readings during testing.
This could result in faulty results or even damaged material due to incorrect measurements being taken during testing due to improper operation of your meter by an untrained operator!
With so many benefits to be reaped from Fluke Meter Calibration, it is important that you take the necessary steps to ensure that it is in working condition. You don't want any surprises when you need to conduct tests on your equipment or materials.
There are many different types of meters available in the market today, such as electric spark gap testers, but these should not be used for calibration purposes due to their inherent inaccuracies caused by factors like temperature changes or aging.