Hose Fittings Factory introduces the selection requirements for metal hose fittings:

1. Liquid pressure: The pressure of the fluid is also the link for selecting the quick connector;

2. The structure of the automatic switch valve. Regarding the structure of the valve, there are two-way switch type, one-way switch type and two-way open type, so please pay attention;

3. The type and temperature of the fluid are different according to the fluid, and the suitable raw materials for the body and the sealing material are different. Except for the two-way switch type, fluid flows out of the piping during separation. It is recommended to make steel, and for water, choose brass or stainless steel;

4. Please confirm the type and material of the quick connector for the shape and size of the installation, and specify the shape and size of the assembly corresponding to the characteristics of the piping;

5. The application environment of the quick hose joint: Consider the selection of the type of quick joint, the body material, and the sealing material in combination with the humidity conditions of the operating environment, the condition of dust, and the use environment that is easy to corrode.

Through the above introduction, Hydraulic Fittings Factory hopes that you can simply refer to the content of this article in future use.