Recent Updates
  • What is Spline Shaft?
    The spline shaft is a kind of mechanical transmission. The flat key, half-circle key, and oblique key have the same function to transmit mechanical torque. There are longitudinal keyways on the surface of the shaft, and the rotating parts on the shaft also have corresponding keyways to keep Rotate synchronously with the axis. While rotating, some can also slide longitudinally on the shaft,...
    0 Comments 0 Shares
  • What is High-speed Electric Spindle Shaft?
    Because it is integrated with the electric motor, the Electric Spindle Shaft itself can also be regarded as a high-speed electric motor. There can be many different structural methods, such as induction motors, permanent magnet motors and reluctance motors. The key skill is the dynamic balance at high speed. Electric Spindle Shaft main accessories equipment A complete electric spindle system...
    0 Comments 0 Shares
  • Classification of Transmission Shaft
    Transmission Shaft is an Element Used to Transmit Power and Torque A transmission shaft is a component used to transmit power and torque. Shafts are made in a variety of different shapes and forms, but most tend to have a solid or tubular circular cross-section. The shaft transmitting power directly from the drive device or power source to the load. The shaft can carry gears, pulleys and...
    0 Comments 0 Shares
  • Classification of Spindle Shaft
    The spindle shaft is a motion shaft that drives the tool or workpiece to rotate on the machine tool to produce cutting motion. According to the driving mode of the spindle shaft, the machine tool spindle can be divided into two categories: mechanical spindle and electric spindle. The mechanical spindle shaft drives the spindle shaft to rotate through the spindle shaft motor and the...
    0 Comments 0 Shares
  • Signs of Drive Shaft Failure
    The drive shaft is a rod-shaped component that transmits torque from the vehicle's engine to the wheels. Essentially it is the axle that drives the vehicle. The transmission shaft transmits torque between the transmission system components at different angles. The shaft assembly must be flexible, which is important because the shaft of the transmission system vibrates up and down and moves...
    0 Comments 0 Shares
  • How to Extend the Service Life of Motor Shaft?
    Proper motor shaft alignment increases the operating life span of rotating machinery. To achieve this goal, components that are the most likely to fail must be made to operate within their acceptable design limits. While misalignment has no measurable effect on motor efficiency, correct shaft alignment ensures the smooth, efficient transmission of power from the motor to the driven...
    0 Comments 0 Shares
  • The role of Spline Shaft
    The spline shaft is a kind of mechanical transmission. The flat key, half-circle key, and oblique key have the same function to transmit mechanical torque. There are longitudinal keyways on the surface of the shaft, and the rotating parts on the shaft also have corresponding keyways to keep Rotate synchronously with the axis. While rotating, some can also slide longitudinally on the shaft,...
    0 Comments 0 Shares
  • Spindle Shaft Orientation Function
    Usually, the spindle shaft is only for speed control, but in some special cases, it is also necessary to control the position of the spindle. For example, when an automatic tool change is performed on a machining center when a tool needs to be changed due to technological requirements in boring processing, and when a workpiece is loaded on a lathe, the spindle needs to be accurately stopped at...
    0 Comments 0 Shares
  • Introduction of Motor Shaft
    The shaft is an important part of the motor, as the link of electromechanical energy conversion between the motor and the equipment, supporting the rotating parts, transmitting the torque and determining the relative position of the rotating parts to the stator. Therefore, the motor shaft must have reliable strength and rigidity to ensure the realization of the preset design function....
    0 Comments 0 Shares
  • The Difference Between Pigment Printing and Dye Printing
    Coated fabric is a kind of fabric treated by a special process. It can form a uniform layer of covering rubber on the surface of the fabric to increase the waterproof, fireproof, and antifouling functions of the fabric. For aesthetics, this kind of clothes is brighter than ordinary clothes. The coated fabric uses solvent or water to dissolve the required coating particles, such as PU glue, A/C...
    0 Comments 0 Shares
More Stories